Type Function Library graphics.* Return value ImageSheet Revision 2017.3060 Keywords sprite sheet, texture atlas, texture memory, images See also Image Sheets (guide)
ImageSheet objects, sometimes referred to as sprite sheets or texture atlases, allow you to load multiple images from a single image file. Image sheets must be used for animated sprites and they can also be used to preload many static images.
By default, new image sheets will use a linear sampling filter, so that the image will look smooth when the actual rendered region is larger or smaller than the pixel dimensions of the loaded texture.
You can change the default texture filter by calling display.setDefault(). Once an image is loaded the first time, the same sampling filter will be applied for any subsequent loads of the same file. This is because textures are loaded once per file.
Image sheet packing tools such as TexturePacker will output the sourceX, sourceY, sourceWidth, and sourceHeight parameters for trimmed frames. When displaying these frames on the screen, the image will be positioned in respect to the center point of the untrimmed frame size.
If you want to use dynamically-selected image sheets — chosen automatically depending on the screen resolution — you must include the sheetContentWidth and sheetContentHeight parameters. See below for details.
On Android, images are limited (downsized) to 2048×2048, even though the maximum texture memory size is higher on the device. The reason is most Android devices don't have enough heap memory to load the image. We recommend that you don't load image files larger than 2048×2048.
graphics.newImageSheet( filename, [baseDir, ] options )
String. This is the filename of the image file that includes all frames of the image sheet. This file is also called a "sprite sheet" image.
Constant. Specifies the base directory where filename is located. Options include system.ResourceDirectory, system.DocumentsDirectory, system.ApplicationSupportDirectory, system.TemporaryDirectory and system.CachesDirectory. Default is system.ResourceDirectory.
Table. Table with keys that represent specific options related to the resulting image sheet — see the next section for details.
Depending on the layout of the image sheet, the options table can be configured in two ways:
This configuration assumes all frames in the image sheet texture share identical properties.
local options =
{
--required parameters
width = 50,
height = 50,
numFrames = 3,
--optional parameters; used for scaled content support
sheetContentWidth = 150, -- width of original 1x size of entire sheet
sheetContentHeight = 50 -- height of original 1x size of entire sheet
}
Number. Width of all images (frames) in the image sheet texture.
Number. Height of all images (frames) in the image sheet texture.
Number. Total number of images (frames) in the image sheet.
Number. The border around each frame, typically used for tiles whose edges are extruded to eliminate seam artifacts. Default is 0. When greater than 0, this overrides the trimming options for cropping the frame.
These values tell Corona the size of the original 1x image sheet. For example, if you're developing for both iPad and iPad Retina, and you're using an image sheet of 1000×1000 for the regular iPad, you should specify 1000 for both of these values and then design your Retina image sheet at 2000×2000. For more information on this topic, see the Project Configuration guide.
This configuration is required if the image sheet has frames of varying sizes. In this case, options consists of an array of tables within a parent frames table, and each of these tables represents a single frame in the image sheet.
local options =
{
--array of tables representing each frame (required)
frames =
{
-- Frame 1
{
--all parameters below are required for each frame
x = 2,
y = 70,
width = 50,
height = 50
},
-- Frame 2
{
x = 2,
y = 242,
width = 50,
height = 52
},
-- Frame 3 and so on...
},
-- Optional parameters; used for scaled content support
sheetContentWidth = 1024,
sheetContentHeight = 1024
}
Number. The x location of the frame in the texture.
Number. The y location of the frame in the texture.
Number. Width of the frame; if cropping, specify cropped width here.
Number. Height of the frame; if cropping, specify cropped height here.
Number. Width of the original uncropped frame. Default is the same as width.
Number. Height of the original uncropped frame. Default is the same as height.
Number. The x origin of the crop rect relative to the uncropped image. Default is 0.
Number. The y origin of the crop rect relative to the uncropped image. Default is 0.
Number. The amount of pixels around each individual frame. This is necessary for scaling image sheets without getting blending artifacts around the edges. Default is 0.
These values tell Corona the size of the original 1x image sheet. For example, if you're developing for both iPad and iPad Retina, and you're using an image sheet of 1000×1000 for the regular iPad, you should specify 1000 for both of these values and then design your Retina image sheet at 2000×2000. For more information on this topic, see the Project Configuration guide.
local options =
{
-- Required parameters
width = 70,
height = 41,
numFrames = 2,
-- Optional parameters; used for scaled content support
sheetContentWidth = 70, -- width of original 1x size of entire sheet
sheetContentHeight = 82 -- height of original 1x size of entire sheet
}
local imageSheet = graphics.newImageSheet( "characterSheet.png", options )
local options =
{
-- Array of tables representing each frame (required)
frames =
{
-- Frame 1
{
x = 2,
y = 70,
width = 50,
height = 50
},
-- Frame 2
{
x = 2,
y = 242,
width = 50,
height = 52
},
},
-- Optional parameters; used for scaled content support
sheetContentWidth = 1024,
sheetContentHeight = 1024
}
local imageSheet = graphics.newImageSheet( "characterSheet.png", options )